Views: 199 Author: Site Editor Publish Time: 2026-11-17 Origin: Site
The demand for versatile truck-mounted lifting equipment continues to grow. Construction contractors, logistics operators, and industrial businesses are looking for cranes that can handle different lifting tasks without taking up too much space on the vehicle.
A knuckle boom crane is a practical solution to this challenge. Unlike a conventional straight boom crane, its articulated structure allows the boom to fold at multiple joints, making it easier to position the lifting arm around obstacles and store it in a compact configuration.
At bauma CHINA 2026, Xuzhou Fuman Special Vehicle Co., Ltd. (FUMAN) will present its F090Z 3+1 customized truck-mounted crane at outdoor booth ON.110. The exhibition runs from November 23 to 26, 2026, at the Shanghai World Expo Exhibition & Convention Center.
The F090Z 3+1 is designed around a three-section hydraulic boom with one additional manual extension boom. This configuration provides operators with another way to extend the working reach while retaining the folding structure's space-saving advantages.
With a maximum lifting capacity of 4,000 kg and a maximum rated working radius of 7.7 meters, the F090Z is a compact lifting solution for customers who need a balance between lifting performance, working reach, and installation space.
For buyers evaluating a folding arm crane for truck installation, the F090Z offers an interesting configuration worth exploring.
The FUMAN F090Z 3+1 is a truck-mounted knuckle boom crane developed for material handling and lifting operations.
Its name describes its boom configuration:
3 hydraulic boom sections: The main articulated boom assembly uses three hydraulic boom sections.
1 manual extension boom: An additional manually extended section provides supplementary reach.
Unlike a standard telescopic boom crane, which primarily extends and retracts along a straight line, a knuckle boom crane uses articulated joints to change the boom's position.
This allows the operator to fold, unfold, and position the boom according to the available working space.
The additional manual boom gives the F090Z another extension option. Rather than relying entirely on hydraulic telescoping, the operator can use the manual section when the working conditions and lifting requirements call for it.
This design is particularly useful for truck-mounted lifting applications where the crane needs to perform different tasks while remaining relatively compact during transportation.
When comparing truck-mounted cranes, buyers should look beyond the maximum lifting capacity. Working radius, lifting moment, crane weight, hydraulic requirements, and installation dimensions all influence whether a crane is suitable for a particular vehicle and job.
The following specifications are based on FUMAN's F090Z-3A technical drawings.
Technical parameter | F090Z-3A |
|---|---|
Maximum lifting capacity | 4,000 kg |
Maximum lifting moment | 90 kN·m |
Rated load at 2.2 m | 4,000 kg |
Rated load at 4.35 m | 1,800 kg |
Rated load at 5.9 m | 1,300 kg |
Rated load at 7.7 m | 900 kg |
Maximum working radius shown | 7.7 m |
Slewing angle | 400° |
Recommended power | 7.5 kW |
Hydraulic system flow | 25 L/min |
Hydraulic system pressure | 25 MPa |
Oil tank capacity | 60 L |
Crane self-weight | 350 kg |
Installation space | 850 mm |
Note: The manual extension boom is part of the 3+1 configuration. The load figures above are reproduced from the F090Z-3A supplied loading chart. Buyers should confirm the applicable boom configuration and rated load chart before ordering.
One of the most important specifications of a knuckle boom crane is its lifting capacity at different working radii.
The F090Z has a maximum rated lifting capacity of 4 tonnes, but this does not mean it can lift 4 tonnes at every point within its working range.
Its rated lifting capacity changes as the working radius increases.
F090Z Rated Lifting Capacity
Rated loads at four specified working radii, based on the supplied loading chart.
As the boom extends farther from the crane's mounting position, its rated lifting capacity decreases. This is a normal characteristic of hydraulic lifting equipment and should always be considered during crane selection and operation.
For example:
At a 2.2-meter working radius, the rated lifting capacity is 4,000 kg.
At 4.35 meters, the rated capacity is 1,800 kg.
At 5.9 meters, the rated capacity is 1,300 kg.
At 7.7 meters, the rated capacity is 900 kg.
This capacity distribution makes the F090Z suitable for jobs involving different combinations of load weight and working distance, provided the actual operating conditions remain within the approved load chart.
A crane's value is not determined by lifting capacity alone. Its overall design, installation requirements, operating flexibility, and compatibility with the intended vehicle also matter.
Here are several features that make the F090Z configuration worth considering.
Compact Installation Requirements:The technical drawing specifies an installation space of 850 mm.A compact installation requirement can provide more flexibility when planning the vehicle layout.However, the final installation must also account for chassis strength, mounting structure, axle loads, and outrigger positioning.
Four-Hundred-Degree Slewing:The F090Z has a specified slewing angle of 400°.This gives the operator a wide working range when positioning the crane during lifting operations.The ability to rotate beyond a conventional 360-degree range can be useful when the crane needs to handle loads from different directions.
A 90 kN·m Maximum Lifting Moment:Lifting moment is an important parameter when evaluating crane performance.For the F090Z, the specified maximum lifting moment is 90 kN·m.
Hydraulic System Designed for Its Rated Performance
The F090Z technical specification lists:
- Hydraulic flow: 25 L/min
- Hydraulic pressure: 25 MPa
- Oil tank capacity: 60 L
- Recommended power: 7.5 kW
These parameters provide a starting point for evaluating the hydraulic power requirements and compatibility with the intended installation.
Lightweight Crane Structure:The F090Z has a listed self-weight of 350 kg.Crane weight matters because the equipment becomes part of the vehicle's overall payload and weight distribution.A lower crane weight can help preserve more available vehicle payload, although the actual benefit depends on the chassis, mounting equipment, stabilizers, and other installed components.
Choosing the right crane is only one part of a successful equipment purchase. The manufacturer's engineering experience, production capability, quality control, and ability to provide technical support are also important.
Xuzhou Fuman Special Vehicle Co., Ltd. was established in 2010 and is based in Xuzhou, Jiangsu Province, China.FUMAN operates a 16,000-square-meter manufacturing facility and specializes in truck-mounted cranes and other specialized vehicle-mounted equipment.
Its product range includes:
- Truck-mounted knuckle boom cranes
- Truck-mounted telescopic boom cranes
- Marine cranes
- Railway cranes
- Forestry and timber-handling cranes
- Customized special-purpose lifting equipment
FUMAN also emphasizes product development, engineering design, manufacturing, inspection, and quality control.
For international customers, the ability to discuss specific lifting requirements with the manufacturer is particularly important.
Rather than selecting a crane based solely on a product photograph or maximum lifting capacity, buyers can discuss the intended vehicle, working radius, lifting requirements, boom configuration, and optional attachments.This is especially relevant for customized configurations such as the F090Z 3+1.
For more information about FUMAN, please contact our team or visit the official website.
The FUMAN F090Z 3+1 demonstrates how a compact truck-mounted knuckle boom crane can combine an articulated folding structure with a three-section hydraulic boom and an additional manual extension.
With a maximum rated lifting capacity of 4,000 kg, a maximum lifting moment of 90 kN·m, a 7.7-meter working radius shown in the supplied load chart, and a listed self-weight of 350 kg, it offers a configuration worth considering for a range of material-handling and vehicle-mounted lifting applications.
Its 400° slewing angle, 850 mm installation space, and specified hydraulic system provide further reference points for customers evaluating its suitability.
However, the best crane is not necessarily the one with the largest lifting capacity. It is the one that matches the actual load, working radius, vehicle platform, and operating environment.
If you are looking for a folding arm crane for your truck or need a customized truck-mounted lifting solution, FUMAN can help you evaluate the appropriate configuration.